Determine the leaks in foil cups with Presto vacuum leak tester

Determine the leaks in foil cups with a Presto vacuum leak tester

Foil cups are a common type of packaging that is commonly used to pack yogurt, pudding, and other related desserts. Foil cups provide an excellent barrier to oxygen and moisture, which helps to keep food fresh and prevents it from drying out. To maintain the temperature of these cups, the cup needs to be properly insulated by a film that creates a vacuum between the insulating film and the cup surface. If there will be the formation of air bubbles in the cups, then the material needed to be improved to remove any kind of voids. Thus to make it easy for packaging manufacturers to test their materials against vacuum leaks, we at Presto have designed a high-quality vacuum leak tester digital.

This economic and proficient lab testing instrument has been designed to measure and inspect any sort of leaks present in the packaging materials. We are a leading vacuum leak tester manufacturer in India and provide this testing instrument at the best prices. Here in this blog, we are going to provide you the information about how the Presto vacuum leak testing instrument is proficient enough to test the leakage in foiled cups. We will also discuss the working of this lab testing equipment for determining the vacuum leaks. So, let us get started!

Importance of testing the vacuum leaks in foiled cups

A vacuum in a foiled cup is created when the air inside the cup is removed. It is important to check the vacuum in a foiled cup because if there is no vacuum, the foil will not adhere to the cup and will not create an airtight seal. This can cause the contents of the cup to spoil or leak.

Besides this, if the vacuum is not maintained, the foil could be pulled off of the cup, leaving the beverage inside exposed to contaminants. Thus, testing the vacuum leaks in packaging materials, like foiled cups is very important to ensure that accurate products will be delivered to the customers. When the vacuum is not properly maintained, it can allow oxygen and other harmful bacteria to enter the food, which can cause spoilage and potentially make people sick. By checking the vacuum regularly, you can help to ensure that your food stays fresh and safe to eat.

We at Presto have designed a high-quality vacuum leak tester digital model that works well to find leaks. This lab testing equipment is widely used in the packaging industry to inspect any sort of leaks in packaging material like foiled cups, gels, grains, and other related materials. You can easily maintain food quality using the Presto vacuum leak tester.

Introduction about Presto vacuum leak tester digital

Testing the vacuum leaks is an important part of quality control. A vacuum leak can cause all sorts of problems with a product, from decreased efficiency to complete failure. To make it easy for the manufacturers to test the vacuum leaks, we at Presto have designed a high-quality vacuum leak tester digital that works to test the vacuum leak integrity and intactness of the packaging products and ensure that accurate products will be delivered to the customers. This lab testing equipment has been designed in accordance with industrial standards that includes ASTM F 2338-09(2013), ASTM D 4991-07(2015), and ASTM D6653. This high-quality lab testing equipment consists of a clear acrylic vacuum chamber and system that makes it easy for the manufacturers to conduct vacuum leak tests on the materials. Below we have listed the features and technical specifications of this quality lab testing equipment. You can easily maintain the seal integrity of the material, with the help of a Presto vacuum leak tester.

Features of Presto vacuum leak tester

The Presto vacuum leak testing equipment is one of the widely used lab testing equipment in the packaging industry, due to its ability to test vacuum leaks of the materials with its simple and easy-to-operate working mechanism. It has been designed with high-quality features that we have listed below.

Offers accurate and reliable results
Strictly complies with international quality standards.
Provided by a calibration credential acceptable to NABL-approved labs.
Microprocessor-based for accuracy and repeatability
Meets USP 28 Packaging Practice specification
Automatic sample testing through an easy vacuum mechanism
Pressure, Inlet Vacuum Pressure setting, and Pre-set Timer function incorporated
Changeable Timer Units in Hrs:min: sec
Digital Pressure displays for easy pressure monitoring
Stainless steel and powder-coated body for a corrosion-resistant finish

Technical Specifications of Presto vacuum leak tester

Vacuum adjustable up to – 800 MB (-600 mm-Hg.)
Box made of polished transparent PMMA (very rugged)
Easy to use and safe
2-stage vacuum and holding time setting
Accuracy: 0.5% of the measure
Delivered with vacuum generator
Customized Box with dimensions upon request

With these high-end features and technical specifications, one can easily test the vacuum leaks present in the foiled cups. You can easily test the quality standards of pouches with a Presto vacuum leak tester. Now, let us discuss the working of a vacuum leak tester for testing vacuum leaks present in the foiled cups.

How to test vacuum leaks present in foiled cups with a Presto vacuum leak tester?

The air bubbles present in the foiled cups can severely impact the quality of these materials. Thus, it is important for you to test the vacuum leaks present in the materials, with the help of a quality lab testing instrument known as a vacuum leak tester designed by the experts at Presto. Below we have listed some easy-to-follow steps for testing the vacuum leaks present in foiled cups.

First of all, turn the machine on by plugging the mains socket of the machine into a 3-pin 15 amp socket. Set the test duration timing on the digital timer.
After setting the digital timer, remove the desiccator cover and place the test specimen inside the desiccator.
After placement of the Specimen, put the cover back on the desiccator.
Once the specimen is properly placed then turn the inlet knob to close position and commence the test.

In this way, you can easily operate the Presto vacuum leak tester and conduct a vacuum leak test on the materials. You can also check the HMI model of the vacuum leak tester, the vacuum leak tester-prima (dry and wet) model, and many others. You can even take a FREE sample testing session with the help of this lab testing instrument by giving us a call at +91 9210903903 or email us at info@prestogroup.com. Our team of technical experts will consult you regarding all your needs and queries.

Catalogue 2023

Get information about new product launches, research, innovation and endeavors at Presto.

download Free Copy

Need more information

Connect with us for your business enquiries. Generally we respond within one or two working days.

send enquiries

Contact Us

Get a Quote