Bathware Testing Instruments
Salt Spray Chamber (Corrosion Tester) - Patent No. 244580
Salt Spray Chamber is made as per ASTM B117 and JIS 2371 which is used for conducting Neutral Salt Spray Test or NSS test on Meta Surface Coatings. It is used for checking the resistance of the coating towards corrosive environment. The Salt Spray Tester generates an accelerated form of Salt laden environment inside which the specimen are tested for its quality.
Our Salt Spray Chambers come with three different types of specimen-holding fixtures. Those are as follows:
- Panel-type sample holding fixtures
- FRP hanging rods holding fixtures for thick samples
- V-Grooved tray for Fasteners
Download E-Book
Registered Design Patent No. 244580
.jpeg)
Box Compression Tester Digital
Box Compression Tester is a consistent tool to indicate the Compression strength of cardboard boxes so that it does not get deformed or crushed when stacked one above the other during storage or transit. Cardboard boxes are commonly stacked one on top of the other, during warehousing and storage. So, to ensure that they do not collapse during this, it is necessary to measure their box compression strength.It is based on the principle of measuring the maximum load that the material can withstand without breaking. This process is performed by applying a gradually increasing compression force to a sample until it fails using Box Compression Tester.
Using the equipment, a force-deformation curve can be obtained. This curve helps us evaluate the resistance of a package. It is a reliable equipment that provides accurate information regarding the compressive strength and durability of the package. It enables manufacturers to choose a more resistant packaging and to ensure the contents of the package don’t get damaged during stacking or transit.
Thus, corrugated boxes/cartons/paper packaging can be tested using Box Compression tester. It is widely used to determine compressive resistance, deformation and stacking capability of cartons and corrugated boxes.
Registered Design Patent No. 279106
Bursting Strength Tester Genie 2.0
The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the material's quality as compared to the others. Bursting Strength Tester Genie 2.0 provides a hydraulic pressure on the sample.
In the Presto Bursting Strength Tester, a hydraulic pressure is applied on the sample under test, using a neoprene diaphragm, on a circular area. So, a circular piece of the sample of the corrugated board is used for the test. A digital indicator with a range of 0 to 40 kg/ square cm, is utilized for the equipment.
Registered Design Patent No. 279109
Coating Thickness Gauge Ferrous
Presto coating thickness gauge is the perfect instrument to use measure the expected life of coating. Widely used in paints and dry coating, it measures the dry film thickness very efficiently. Dry coating measurement is a very crucial prospect as it defines a lot about the process, cost and quality. Apart from that, the performance can be estimated in different working environments. It is a non-destruction form of testing and can be used for on-site inspection.
Coating Thickness Gauge Ferrous & Non Ferrous
It is one of the best product to measure the coating thickness measurement of ferrous and non-ferrous coatings. Designed ergonomically to use in on-site inspection, its portable nature makes it easy to use. It has a bright LCD display for easy reading. The machine has very simple operation and does not require special skills to operate the instrument. It is used to determine the quality and life expectancy of the thickness coating.
Coating Thickness Gauge Non Ferrous
Coating thickness gauge is widely used in measuring the coating of the surface. Used widely in metal industries, it can be efficiently used to measure the non-conductive coating over a non-ferrous surface. To protect the metal surfaces from corrosion, they are often coated with paint or metallic coating. To estimate the life and quality, coating thickness measurement in often done. Using a digital gauge eases the process and does not require special skill for this.
Drop Tester Motorised Pneumatic
Drop tester is the perfect machine to test the drop strength of the corrugated cartons. It is equipped with a wired remote-control mechanism to eliminate the human interference. The test specimen is observed visually after it is made to fall from a certain height. The instrument work with pneumatic application and used in almost every industry that deals with corrugated cartons.
Laboratory Hot Air Oven
Hot Air Oven is a unique test cabinet designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of testing device at elevated temperature. Works on Forced air circulation, thermal convection principle, suitable for Tests like heat deformation, compression set, heat resistance required in rubber and plastic industries.
